ACCIDENT IDENTIFICATION SYSTEM

           ACCIDENT IDENTIFICATION SYSTEM

   

(ABSTRACT)

Accident identification system is an advanced method used to track and monitor any remote vehicle equipped with a software unit that receives and transfers signals through GPS satellite. It is a combination of Global Positioning System (GPS) and Geographic Information System (GIS) that provides actual geographic real time position of each vehicle. The entire transmission mechanism of this project setup depends on GPS satellite, a receiver on the vehicle, a radio system and controller based tracking for dispatch. The radio communication system is generally the same as cellular phone network. The two most common systems are like GPS based and Signpost based. This accident identification system is used to identify at what place accident has occurred. The limit switch is used to identify whether accident happened or not.

This project is aimed to track the vehicles that which mean to locate the position of the vehicle where accident occurred. The location of the vehicle is indicated using GPS (global positioning system) technology. Communication link is made possible through a GPS receiver. GPS will give the information of parameters like longitude, latitude and attitude with this we can easily identify where accident occurred immediately and send the message to the control room through GSM modem connected to the micro controller.

SOFTWARE: Embedded ‘C’

TOOLS: Keil, Flash magic

TARGET DEVICE: 8051 Microcontroller

APPLICATIONS: Tracking vehicle position and to identify the place where accident occurred.

ADVANTAGES: Low cost, automated operation, Low Power

consumption.

REFERENCE: The 8051 micro controller and     embedded systems by

Mazidi .